星空网 > 软件开发 > 操作系统

linux enc28j60网卡驱动移植(硬件spi和模拟spi)

本来想移植DM9000网卡的驱动,无奈硬件出了点问题,通过杜邦线链接开发板和DM9000网卡模块,系统上电,还没加载网卡驱动就直接崩溃了,找不到原因。。。刚好手上有一个enc28j60的网卡模块,于是就着手移植enc28j60的驱动。

其实移植enc28j60的驱动也十分简单,网上有现成的,只需要分配一些硬件资源即可。

由于我的内核版本老到掉牙,没有自带enc28j60的驱动,只能在网上找一个:

enc28j60.c

http://git.ti.com/ti-linux-kernel/ti-linux-kernel/blobs/7dac6f8df607929e51f4fd598d80bd009c45a9f8/drivers/net/enc28j60.c

enc28j60_hw.h

http://git.ti.com/ti-linux-kernel/ti-linux-kernel/blobs/7dac6f8df607929e51f4fd598d80bd009c45a9f8/drivers/net/enc28j60_hw.h

由于这个驱动是支持较新的内核,移植到2.6.22.6,只要改动3个地方好了。

 1 ... ... 2  3 static int enc28j60_set_hw_macaddr(struct net_device *ndev) 4 { 5   ... ... 6    7   if (!priv->hw_enable) { 8     if (netif_msg_drv(priv)) { 9       /* [cgw]: 屏蔽一下几行 */10       //DECLARE_MAC_BUF(mac);11       //printk(KERN_INFO DRV_NAME12       //  ": %s: Setting MAC address to %s\n",13       //  ndev->name, print_mac(mac, ndev->dev_addr));14     }15   }16 17   ... ...18 }19 20 ... ...21 22 static void dump_packet(const char *msg, int len, const char *data)23 {24   printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);25   /* [cgw]: 屏蔽一下几行 */26   //print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,27   //    data, len, true);28 }29 30 ... ...31   32 static int enc28j60_net_open(struct net_device *dev)33 {34   ... ...35 36   if (!is_valid_ether_addr(dev->dev_addr)) {37     if (netif_msg_ifup(priv)) {38       /* [cgw]: 屏蔽一下几行 */39       //DECLARE_MAC_BUF(mac);40       //dev_err(&dev->dev, "invalid MAC address %s\n",41       //  print_mac(mac, dev->dev_addr));42     }43     return -EADDRNOTAVAIL;44   }45 46   ... ...47 }48 49 ... ...


都是些打印相关的东西,屏蔽掉就好。

spi的框架可以参考这里:http://www.cnblogs.com/hackfun/p/6082489.html

这里只列出配置spi硬件资源的代码,只需要写一个spi_platform_dev.c文件就行了。模拟spi的模式下,spi_platform_dev.c和http://www.cnblogs.com/hackfun/p/6082489.html这里的spi_platform_dev.c文件相似,只需要增加一个外部中断入口给enc28j60用于接收中断,和更改spi的模式等。

模拟spi的模式下的spi_platform_dev.c

 1 #include <linux/module.h> 2 #include <linux/version.h> 3  4 #include <linux/init.h> 5  6 #include <linux/kernel.h> 7 #include <linux/types.h> 8 #include <linux/interrupt.h> 9 #include <linux/list.h> 10 #include <linux/timer.h> 11 #include <linux/init.h> 12 #include <linux/serial_core.h> 13 #include <linux/platform_device.h> 14 #include <linux/irq.h> 15  16 #include <asm/gpio.h> 17 #include <asm/io.h> 18 #include <asm/arch/regs-gpio.h> 19  20 #include <linux/spi/spi.h> 21 #include <linux/spi/spi_bitbang.h> 22  23 #include <asm/arch/regs-spi.h> 24 #include <asm/arch/spi.h> 25 #include <asm/arch/spi-gpio.h> 26  27  28 static struct spi_board_info board_info[1] = { 29   { 30   .modalias = "enc28j60",  /* [cgw]: spi设备名,和设备驱动名对应 */ 31   .bus_num = 0,         /* [cgw]: spi总线号,即spi0 */ 32   .chip_select = 2,       /* [cgw]: spi总线上的设备号,即spi0.2 */ 33   .max_speed_hz  = 50000,   /* [cgw]: spi时钟 */ 34   .mode = SPI_MODE_0,      /* [cgw]: spi数据模式 */ 35   .irq = IRQ_EINT2, 36   }, 37 }; 38  39  40 static void enc28j60_chip_select(struct s3c2410_spigpio_info *spi, int cs) 41 { 42   /* [cgw]: 选中设备号为2的spi设备 */ 43   if (spi->board_info->chip_select == 2) { 44     s3c2410_gpio_cfgpin(S3C2410_GPG2, S3C2410_GPIO_OUTPUT); 45     /* [cgw]: 选中设备 */ 46     if (BITBANG_CS_ACTIVE == cs) { 47       s3c2410_gpio_setpin(S3C2410_GPG2, 0); 48     /* [cgw]: 释放设备 */ 49     } else if (BITBANG_CS_INACTIVE == cs) { 50       s3c2410_gpio_setpin(S3C2410_GPG2, 1); 51     } 52   } 53 } 54  55 /* [cgw]: */ 56 static struct s3c2410_spigpio_info spi_dev = { 57   .pin_clk = S3C2410_GPG7, 58   .pin_mosi = S3C2410_GPG6, 59   .pin_miso = S3C2410_GPG5, 60   .board_size = 1,          /* [cgw]: 设置板上spi接口数量为1 */ 61   .board_info = &board_info[0], 62   .chip_select = enc28j60_chip_select 63 }; 64  65 static void spi_dev_release(struct device * dev) 66 { 67   printk("spi_dev_release! \n"); 68 } 69  70 /* [cgw]: 分配一个平台设备 */ 71 static struct platform_device spi_platform_dev = { 72   .name     = "s3c24xx-spi-gpio",    /* [cgw]: 设置平台设备名,和平台驱动名对应 */ 73   .id      = -1, 74   .dev = {  75     .release = spi_dev_release, 76     .platform_data = (void *)&spi_dev,   /* [cgw]: 通过platform_data传递spi_dev给平台驱动 77                         * 平台驱动可以访问spi_dev 78                         */ 79   }, 80 }; 81  82  83 static int spi_dev_init(void) 84 { 85   s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); 86  87   /* [cgw]: 注册spi_platform_dev平台设备 */ 88   platform_device_register(&spi_platform_dev); 89   return 0; 90 } 91  92 static void spi_dev_exit(void) 93 { 94   /* [cgw]: 注销spi_platform_dev平台设备 */ 95   platform_device_unregister(&spi_platform_dev); 96 } 97  98 module_init(spi_dev_init); 99 module_exit(spi_dev_exit);100 101 MODULE_LICENSE("GPL");

 

makefile:

KERN_DIR = /work/system/linux-2.6.22.6all:  make -C $(KERN_DIR) M=`pwd` modules clean:  make -C $(KERN_DIR) M=`pwd` modules clean  rm -rf modules.orderobj-m  += spi_platform_dev.oobj-m  += spi_s3c24xx_gpio.oobj-m  += spi_bitbang.oobj-m  += enc28j60.o

 

硬件spi的模式下的spi_platform_dev.c

 1 #include <linux/module.h> 2 #include <linux/version.h> 3  4 #include <linux/init.h> 5  6 #include <linux/kernel.h> 7 #include <linux/types.h> 8 #include <linux/interrupt.h> 9 #include <linux/list.h> 10 #include <linux/timer.h> 11 #include <linux/init.h> 12 #include <linux/serial_core.h> 13 #include <linux/platform_device.h> 14 #include <linux/irq.h> 15  16 #include <asm/gpio.h> 17 #include <asm/io.h> 18 #include <asm/arch/regs-gpio.h> 19  20 #include <linux/spi/spi.h> 21 #include <linux/spi/spi_bitbang.h> 22  23 #include <asm/arch/regs-spi.h> 24 #include <asm/arch/spi.h> 25 #include <asm/arch/spi-gpio.h> 26  27  28 /* SPI (1) */ 29  30 static struct resource s3c_spi1_resource[] = { 31   [0] = { 32     .start = S3C2410_PA_SPI + S3C2410_SPI1, 33     .end  = S3C2410_PA_SPI + S3C2410_SPI1 + 0x1f, 34     .flags = IORESOURCE_MEM, 35   }, 36   [1] = { 37     .start = IRQ_SPI1, 38     .end  = IRQ_SPI1, 39     .flags = IORESOURCE_IRQ, 40   } 41  42 }; 43  44  45 static struct spi_board_info board_info[1] = { 46   { 47   .modalias = "enc28j60",  /* [cgw]: spi设备名,和设备驱动名对应 */ 48   .bus_num = 0,         /* [cgw]: spi总线号,即spi0 */ 49   .chip_select = 2,       /* [cgw]: spi总线上的设备号,即spi0.2 */ 50   .max_speed_hz  = 50000,   /* [cgw]: spi时钟 */ 51   .mode = SPI_MODE_0,      /* [cgw]: spi数据模式 */ 52   .irq = IRQ_EINT2, 53   }, 54 }; 55  56 static struct s3c2410_spi_info spi_info = { 57   .pin_cs = S3C2410_GPG2,  /* simple gpio cs */ 58   .board_size = ARRAY_SIZE(board_info), 59   .board_info = &board_info[0], 60   .set_cs = NULL 61 }; 62  63  64 static void spi_dev_release(struct device * dev) 65 { 66   printk("spi_dev_release! \n"); 67 } 68  69 /* [cgw]: 分配一个平台设备 */ 70 static struct platform_device spi_platform_dev = { 71   .name     = "s3c2410-spi",    /* [cgw]: 设置平台设备名,和平台驱动名对应 */ 72   .id      = 1, 73   .num_resources   = ARRAY_SIZE(s3c_spi1_resource), 74   .resource   = s3c_spi1_resource, 75   .dev = {  76     .release = spi_dev_release, 77     .platform_data = &spi_info, 78     //.dma_mask = &s3c_device_spi1_dmamask, 79     //.coherent_dma_mask = 0xffffffffUL 80   }, 81 }; 82  83  84 static int spi_dev_init(void) 85 { 86   /* [cgw]: 注册spi_platform_dev平台设备 */ 87   platform_device_register(&spi_platform_dev); 88   return 0; 89 } 90  91 static void spi_dev_exit(void) 92 { 93   /* [cgw]: 注销spi_platform_dev平台设备 */ 94   platform_device_unregister(&spi_platform_dev); 95 } 96  97 module_init(spi_dev_init); 98 module_exit(spi_dev_exit); 99 100 MODULE_LICENSE("GPL");

 

makefile:

KERN_DIR = /work/system/linux-2.6.22.6all:  make -C $(KERN_DIR) M=`pwd` modules clean:  make -C $(KERN_DIR) M=`pwd` modules clean  rm -rf modules.orderobj-m  += spi_platform_dev.oobj-m  += spi_s3c24xx.oobj-m  += spi_bitbang.oobj-m  += enc28j60.o

 


加载spi平台设备时(platform_device),应注意模拟spi时应加载spi_s3c24xx_gpio.c,硬件spi时应加载spi_s3c24xx.c

如:

模拟spi:

1 # insmod spi_bitbang.ko2 # insmod spi_platform_dev.ko3 # insmod spi_s3c24xx_gpio.ko4 # insmod enc28j60.ko


硬件spi:

1 # insmod spi_bitbang.ko2 # insmod spi_platform_dev.ko3 # insmod spi_s3c24xx.ko4 # insmod enc28j60.ko


其中spi_bitbang.c , spi_s3c24xx_gpio.c , spi_s3c24xx.c为内核原生源文件,不需要改动。

 

硬件spi时,加载驱动的实例:

linux enc28j60网卡驱动移植(硬件spi和模拟spi)images/loading.gif' data-original="http://images2015.cnblogs.com/blog/994502/201701/994502-20170107211832003-806924167.png" >

linux enc28j60网卡驱动移植(硬件spi和模拟spi)

linux enc28j60网卡驱动移植(硬件spi和模拟spi)

 

谢谢!

 




原标题:linux enc28j60网卡驱动移植(硬件spi和模拟spi)

关键词:linux

*特别声明:以上内容来自于网络收集,著作权属原作者所有,如有侵权,请联系我们: admin#shaoqun.com (#换成@)。

如何正确开具VAT增值税发票:https://www.kjdsnews.com/a/1375593.html
如何正确处理VAT税务分录:https://www.kjdsnews.com/a/1375594.html
如何正确填写中国VATID:https://www.kjdsnews.com/a/1375595.html
如何正确填写VAT号码:https://www.kjdsnews.com/a/1375596.html
如何正确填写VATID号码:https://www.kjdsnews.com/a/1375597.html
如何正确填写VATID信息:https://www.kjdsnews.com/a/1375598.html
九寨沟景区地图(详细指南和攻略):https://www.vstour.cn/a/365176.html
重庆品胜科技与星苹台达成合作 助力部队现代化后勤建设 :https://www.kjdsnews.com/a/1836523.html
相关文章
我的浏览记录
最新相关资讯
海外公司注册 | 跨境电商服务平台 | 深圳旅行社 | 东南亚物流