1.写出leds_open,leds_write函数
2.1告诉内核这几个函数的存在?定义一个结构体file_operations
2.2把这个结构体告诉内核?用register_chrdev(major,name,file_operations)
//将主设备号与file_operations结构一起向内核注册
//major=register_chrdev(0,name,file_operations)表示major是由系统自动分配的;
3.谁来调用register_chrdev?有驱动的入口函数first_drv_init
4.怎么知道入口函数就是first_drv_init?使用module_init函数来修饰入口函数,\
内核启动时,先寻找module_init这个结构体。eg:module_init(first_drv_init)
5.当然,也会存在注销相应函数的操作;
eg:unregister_chrdev(major, "first_drv")
module_exit(first_drv_exit)
6.仿照其他程序加一些必要的头文件
7.如果要使驱动程序可以支持自动创建/dev/xxx,则驱动程序中需支持mdev机制。
7.1由mdev根据系统信息创建设备节点(sys/class/firstdev),需要定义两个结构体
static struct class *firstdrv_class;
static struct class_device *firstdrv_class_dev;
7.2在first_drv_init内加入以下两条代码
firstdrv_class = class_create(THIS_MODULE, "firstdrv");
firstdrv_class_dev = class_device_create(firstdrv_class, NULL, MKDEV(major, 0), NULL, "xyz"); /* /dev/xyz */
同理,在first_drv_exit内加入以下两条代码
class_device_unregister(firstdrv_class_dev);
class_destroy(firstdrv_class);
/*猜测:将firstdrv放在firstdrv_class这个结构体里面,然后根据这个使用class_device_create创建设备节点*/
8.由于驱动程序不能直接操作物理地址,需要操作虚拟地址,则需要一个物理地址到虚拟地址的映射。
查看2440手册,得出相应的物理地址,然后使用iorema函数完成映射,结束时使用iounmap撤销;
eg:gpfcon = (volatile unsigned long *)ioremap(0x56000050, 16);//用volatile防止编译器优化,必须每一次都来检测。
iounmap(gpfcon);
9.最后加上MODULE_LICENSE("GPL");//务必在ko驱动中追加此声明,否则insmod驱动时将不能与/proc/kallsyms中的符号正常连接
可以modinfo xxx.ko查看其依赖的模块,可知其中licens依赖于GPL
10.修改makefile的最后一行为:obj-m += first_drv.o
且把first_drv放在makefile对应的文件位置,执行make,得到first_drv.ko文件,使用insmod、rmmod、lsmod、modinfo实现对其操作;
11.测试驱动程序
arm-linux-gcc -o firstdrvtest firstdrvtest.c
根据测试程序进行操作即可;
12.因为使用的是2.6.22.6的内核,要使用3.4.5的gcc版本来交叉编译,否则无法运行。
1 #include <linux/module.h> 2 #include <linux/kernel.h> 3 #include <linux/fs.h> 4 #include <linux/init.h> 5 #include <linux/delay.h> 6 #include <asm/uaccess.h> 7 #include <asm/irq.h> 8 #include <asm/io.h> 9 #include <asm/arch/regs-gpio.h>10 #include <asm/hardware.h>11 12 13 static struct class *ptFirstdrvClass;14 static struct class_device *ptFirstdrvClassDev;15 16 volatile unsigned long *pulgpfcon = NULL;17 volatile unsigned long *pulgpfdat = NULL;18 19 static int firstdrv_open(struct inode *inode, struct file *file)20 { 21 //printk("first_drv_open\n");22 /* 配置GPF4,5,6为输出 */23 *pulgpfcon &= ~((0x3<<(4*2)) | (0x3<<(5*2)) | (0x3<<(6*2)));24 *pulgpfcon |= ((0x1<<(4*2)) | (0x1<<(5*2)) | (0x1<<(6*2)));25 return 0;26 }27 28 static ssize_t firstdrv_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)29 {30 int val;31 32 //printk("first_drv_write\n");33 34 copy_from_user(&val, buf, count); // copy_to_user();35 36 if (val == 1)37 {38 // 点灯39 *pulgpfdat &= ~((1<<4) | (1<<5) | (1<<6));40 }41 else42 {43 // 灭灯44 *pulgpfdat |= (1<<4) | (1<<5) | (1<<6);45 }46 47 return 0;48 }49 50 static struct file_operations firstdrv_ops ={51 .owner = THIS_MODULE, /* 这是一个宏,推向编译模块时自动创建的__this_module变量 */52 .open = firstdrv_open, 53 .write = firstdrv_write, 54 55 };56 57 int g_iMajor;58 static int firstdrv_init(void)59 {60 g_iMajor = register_chrdev(0,"first_drv",&firstdrv_ops);61 ptFirstdrvClass = class_create(THIS_MODULE, "firstdrv");62 ptFirstdrvClassDev = class_device_create(ptFirstdrvClass, NULL, MKDEV(g_iMajor, 0), NULL, "xyz"); /* /dev/xyz */63 64 pulgpfcon = (volatile unsigned long *)ioremap(0x56000050, 16);65 pulgpfdat = pulgpfcon + 1;66 67 return 0;68 69 70 }71 72 static int firstdrv_exit(void)73 {74 unregister_chrdev(g_iMajor, "first_drv");75 class_device_unregister(ptFirstdrvClassDev);76 class_destroy(ptFirstdrvClass);77 78 iounmap(pulgpfcon);79 80 return 0;81 82 } 83 84 85 86 module_init(firstdrv_init);87 88 module_exit(firstdrv_exit);89 90 MODULE_LICENSE("GPL");
原标题:驱动01.LED
关键词: