星空网 > 软件开发 > 数据库

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

Exercise 1:Linear Regression---实现一个线性回归

关于如何实现一个线性回归,请参考:http://www.cnblogs.com/hapjin/p/6079012.html

 

Exercise 2:Logistic Regression---实现一个逻辑回归

问题描述:用逻辑回归根据学生的考试成绩来判断该学生是否可以入学。

这里的训练数据(training instance)是学生的两次考试成绩,以及TA是否能够入学的决定(y=0表示成绩不合格,不予录取;y=1表示录取)

因此,需要根据trainging set 训练出一个classification model。然后,拿着这个classification model 来评估新学生能否入学。

训练数据的成绩样例如下:第一列表示第一次考试成绩,第二列表示第二次考试成绩,第三列表示入学结果(0--不能入学,1--可以入学)

34.62365962451697, 78.0246928153624, 030.28671076822607, 43.89499752400101, 035.84740876993872, 72.90219802708364, 060.18259938620976, 86.30855209546826, 1............

 

训练数据图形表示 如下:橫坐标是第一次考试的成绩,纵坐标是第二次考试的成绩,右上角的 + 表示允许入学,圆圈表示不允许入学。(分数决定命运,太悲惨了!)

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

该训练数据的图形 可以通过Matlab plotData函数画出来,它调用Matlab中的plot函数和find函数,Matlab代码实现如下:

function plotData(X, y)%PLOTDATA Plots the data points X and y into a new figure %  PLOTDATA(x,y) plots the data points with + for the positive examples%  and o for the negative examples. X is assumed to be a Mx2 matrix.% Create New Figurefigure; hold on;% ====================== YOUR CODE HERE ======================% Instructions: Plot the positive and negative examples on a%        2D plot, using the option 'k+' for the positive%        examples and 'ko' for the negative examples.%pos = find(y==1);neg = find(y==0);plot(X(pos, 1), X(pos, 2), 'k+', 'LineWidth', 2, 'MarkerSize', 7);plot(X(neg, 1), X(neg, 2), 'ko', 'MarkerFaceColor', 'y', 'MarkerSize', 7);% =========================================================================hold off;end

 

Matlab加载数据:

%% Load Data% The first two columns contains the exam scores and the third column% contains the label.data = load('ex2data1.txt'); X = data(:, [1, 2]); y = data(:, 3);% 矩阵 X 取数据的所有行的第一列和第二列,向量 y 取数据的第三列

由上面代码可知:Matlab将文本文件中的训练数据加载到 矩阵X 和 向量 y 中

 

加载完数据之后,执行以下代码(调用自定义的plotData函数),将图形画出来:

plotData(X, y);% Put some labels hold on;% Labels and Legendxlabel('Exam 1 score') %标记图形的 X 轴ylabel('Exam 2 score') %标记图形的 Y 轴% Specified in plot orderlegend('Admitted', 'Not admitted') %图形的右上角标签hold off;

 

图形画出来之后,对训练数据就有了一个大体的可视化的认识了。接下来就要实现 模型了,这里需要训练一个逻辑回归模型。

 

①sigmoid function

对于 logistic regression而言,它针对的是 classification problem。这里只讨论二分类问题,比如上面的“根据成绩入学”,结果只有两种:y==0时,成绩未合格,不予入学;y==1时,可入学。即,y的输出要么是0,要么是1

如果采用 linear regression,它的假设函数是这样的:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

假设函数的取值即可以远远大于1,也可以远远小于0,并且容易受到一些特殊样本的影响。比如在上图中,就只能约定:当假设函数大于等于0.5时;预测y==1,小于0.5时,预测y==0。

而如果引入了sigmoid function,就可以把假设函数的值域“约束”在[0, 1]之间。总之,引入sigmoid function,就能够更好的拟合分类问题中的数据,即从这个角度看:regression model 比 linear model 更合适 classification problem.

引入sigmoid后,假设函数如下:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

sigmoid function 用Matlab 实现如下:

function g = sigmoid(z)%SIGMOID Compute sigmoid functoon%  J = SIGMOID(z) computes the sigmoid of z.% You need to return the following variables correctly g = zeros(size(z));% ====================== YOUR CODE HERE ======================% Instructions: Compute the sigmoid of each value of z (z can be a matrix,%        vector or scalar).g = 1./(ones(size(z)) + exp(-z)); % ‘点除’ 表示 1 除以矩阵(向量)中的每一个元素% =============================================================end

 

②模型的代价函数(cost function)

什么是代价函数呢?

把训练好的模型对新数据进行预测,那预测结果有好有坏。因此,就用cost function 来衡量预测的"准确性"。cost function越小,表示测的越准。这里的代价函数的本质是”最小二乘法“---ordinary least squares

代价函数的最原始的定义是下面的这个公式:可见,它是关于 theta 的函数。(X,y 是已知的,由training set 中的数据确定了)

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

那如何求解 cost function的参数 theta,从而确定J(theta)呢?有两种方法:一种是梯度下降算法(Gradient descent),另一种是正规方程(Normal Equation),本文只讨论Gradient descent。

而梯度下降算法,本质上是求导数(偏导数),或者说是:方向导数。方向导数所代表的方向--梯度方向,下降得最快。

而我们知道,对于某些图形所代表的函数,它可能有很多个导数为0的点,这类函数称为非凸函数(non-convex function);而某些函数,它只有一个全局唯一的导数为0的点,称为 convex function,比如下图:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

convex function能够很好地让Gradient descent寻找全局最小值。而上图左边的non-convex就不太适用Gradient descent了。

就是因为上面这个原因,logistic regression 的 cost function被改写成了下面这个公式:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

可以看出,引入log 函数(对数函数),让non-convex function 变成了 convex function

再精简一下cost function,其实它可以表示成:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

J(theta)可用向量表示成:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

其Matlab语言表示公式如下:

J = ( log( sigmoid(theta'*X') ) * y + log( 1-sigmoid(theta'*X') ) * (1 - y) )/(-m);

 

③梯度下降算法

上面已经讲到梯度下降算法本质上是求偏导数,目标就是寻找theta,使得 cost function J(theta)最小。公式如下:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

上面对theta(j)求偏导数,得到的值就是梯度j,记为:grad(j)

通过线性代数中的矩阵乘法以及向量的乘法规则,可以将梯度grad表示成向量的形式:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

至于如何证明的,可参考:Exercise 1:Linear Regression---实现一个线性回归

 

其Matlab语言表示公式如下:

grad = ( X' * ( sigmoid(X*theta)-y ) )/m; % X 为 training set 中的 feature variables, y 为training instance(训练样本的结果)结果

 

需要注意的是:对于logistic regression,假设函数h(x)=g(z),即它引入了sigmoid function.

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

最终,Matlab中costfunction.m如下:

function [J, grad] = costFunction(theta, X, y)%COSTFUNCTION Compute cost and gradient for logistic regression%  J = COSTFUNCTION(theta, X, y) computes the cost of using theta as the%  parameter for logistic regression and the gradient of the cost%  w.r.t. to the parameters.% Initialize some useful valuesm = length(y); % number of training examples% You need to return the following variables correctly J = 0;grad = zeros(size(theta));% ====================== YOUR CODE HERE ======================% Instructions: Compute the cost of a particular choice of theta.%        You should set J to the cost.%        Compute the partial derivatives and set grad to the partial%        derivatives of the cost w.r.t. each parameter in theta%% Note: grad should have the same dimensions as theta%%J = (log(theta'*X')*y + (1-y)*log(1-theta'*X'))/(-m);%attention matlab's usageJ = ( log( sigmoid(theta'*X') ) * y + log( 1-sigmoid(theta'*X') ) * (1 - y) )/(-m);% theta = theta - (alpha/m)*X'*(X*theta-y);grad = ( X' * ( sigmoid(X*theta)-y ) )/m;% =============================================================end

 

 

通过调用costfunction.m文件中定义的coustFunction函数,从而运行梯度下降算法找到使代价函数J(theta)最小化的 逻辑回归模型参数theta。调用costFunction函数的代码如下:

%% ============= Part 3: Optimizing using fminunc =============% In this exercise, you will use a built-in function (fminunc) to find the% optimal parameters theta.% Set options for fminuncoptions = optimset('GradObj', 'on', 'MaxIter', 400);% Run fminunc to obtain the optimal theta% This function will return theta and the cost [theta, cost] = ...   fminunc(@(t)(costFunction(t, X, y)), initial_theta, options);

 

从上面代码的最后一行可以看出,我们是通过 fminunc 调用 costFunction函数,来求得 theta的,而不是自己使用 Gradient descent 在for 循环求导来计算 theta。for循环中求导计算theta,可参考:Exercise 1:Linear Regression---实现一个线性回归

 

既然已经通过Gradient descent算法求得了theta,将theta代入到假设函数中,就得到了 logistic regression model,用图形表示如下:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

④模型的评估(Evaluating logistic regression)

那如何估计,求得的逻辑回归模型是好还是坏呢?预测效果怎么样?因此,就需要拿一组数据测试一下,测试代码如下:

%% ============== Part 4: Predict and Accuracies ==============% After learning the parameters, you'll like to use it to predict the outcomes% on unseen data. In this part, you will use the logistic regression model% to predict the probability that a student with score 45 on exam 1 and % score 85 on exam 2 will be admitted.%% Furthermore, you will compute the training and test set accuracies of % our model.%% Your task is to complete the code in predict.m% Predict probability for a student with score 45 on exam 1 % and score 85 on exam 2 prob = sigmoid([1 45 85] * theta); %这是一组测试数据,第一次考试成绩为45,第二次成绩为85fprintf(['For a student with scores 45 and 85, we predict an admission ' ...     'probability of %f\n\n'], prob);% Compute accuracy on our training setp = predict(theta, X);% 调用predict函数测试模型fprintf('Train Accuracy: %f\n', mean(double(p == y)) * 100);fprintf('\nProgram paused. Press enter to continue.\n');pause;

 

模型的测试结果如下:

For a student with scores 45 and 85, we predict an admission probability of 0.774323Train Accuracy: 89.000000

 

那predict函数是如何实现的呢?predict.m 如下:

function p = predict(theta, X)%PREDICT Predict whether the label is 0 or 1 using learned logistic %regression parameters theta%  p = PREDICT(theta, X) computes the predictions for X using a %  threshold at 0.5 (i.e., if sigmoid(theta'*x) >= 0.5, predict 1)m = size(X, 1); % Number of training examples% You need to return the following variables correctlyp = zeros(m, 1);% ====================== YOUR CODE HERE ======================% Instructions: Complete the following code to make predictions using%        your learned logistic regression parameters. %        You should set p to a vector of 0's and 1's%p = X*theta >= 0;% =========================================================================end

 

非常简单,只有一行代码:p = X * theta >= 0,原理如下:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

当h(x)>=0.5时,预测y==1,而h(x)>=0.5 等价于 z>=0

 

⑤逻辑回归的正则化(Regularized logistic regression)

为什么需要正则化?正则化就是为了解决过拟合问题(overfitting problem)。那什么又是过拟合问题呢?

一般而言,当模型的特征(feature variables)非常多,而训练的样本数目(training set)又比较少的时候,训练得到的假设函数(hypothesis function)能够非常好地匹配training set中的数据,此时的代价函数几乎为0。下图中最右边的那个模型 就是一个过拟合的模型。

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

所谓过拟合,从图形上看就是:假设函数曲线完美地通过中样本中的每一个点。也许有人会说:这不正是最完美的模型吗?它完美地匹配了traing set中的每一个样本呀!

过拟合模型不好的原因是:尽管它能完美匹配traing set中的每一个样本,但它不能很好地对未知的 (新样本实例)input instance 进行预测呀!通俗地讲,就是过拟合模型的预测能力差。

因此,正则化(regularization)就出马了。

前面提到,正是因为 feature variable非常多,导致 hypothesis function 的幂次很高,hypothesis function变得很复杂(弯弯曲曲的),从而通过穿过每一个样本点(完美匹配每个样本)。如果添加一个"正则化项",减少 高幂次的特征变量的影响,那 hypothesis function不就变得平滑了吗?

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

正如前面提到,梯度下降算法的目标是最小化cost function,而现在把 theta(3) 和 theta(4)的系数设置为1000,设得很大,求偏导数时,相应地得到的theta(3) 和 theta(4) 就都约等于0了。

更一般地,我们对每一个theta(j),j>=1,进行正则化,就得到了一个如下的代价函数:其中的 lambda(λ)就称为正则化参数(regularization parameter)

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

 

从上面的J(theta)可以看出:如果lambda(λ)=0,则表示没有使用正则化;如果lambda(λ)过大,使得模型的各个参数都变得很小,导致h(x)=theta(0),从而造成欠拟合;如果lambda(λ)很小,则未充分起到正则化的效果。因此,lambda(λ)的值要合适。

最后,我们来看一个实际的过拟合的示例,原始的训练数据如下图:

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结


lambda(λ)==1时,训练出来的模型(hypothesis function)如下:Train Accuracy: 83.050847

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

lambda(λ)==0时,不使用正则化,训练出来的模型(hypothesis function)如下:Train Accuracy: 87.288136

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

lambda(λ)==100时,训练出来的模型(hypothesis function)如下:Train Accuracy: 61.016949

Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

 

Matlab正则化代价函数的实现文件costFunctionReg.m如下:

function [J, grad] = costFunctionReg(theta, X, y, lambda)%COSTFUNCTIONREG Compute cost and gradient for logistic regression with regularization%  J = COSTFUNCTIONREG(theta, X, y, lambda) computes the cost of using%  theta as the parameter for regularized logistic regression and the%  gradient of the cost w.r.t. to the parameters. % Initialize some useful valuesm = length(y); % number of training examples% You need to return the following variables correctly J = 0;grad = zeros(size(theta));% ====================== YOUR CODE HERE ======================% Instructions: Compute the cost of a particular choice of theta.%        You should set J to the cost.%        Compute the partial derivatives and set grad to the partial%        derivatives of the cost w.r.t. each parameter in theta%J = ( log( sigmoid(theta'*X') ) * y + log( 1-sigmoid(theta'*X') ) * (1 - y) )/(-m);%J = ( log( sigmoid(theta'*X') ) * y + log( 1-sigmoid(theta'*X') ) * (1 - y) )/(-m) + (lambda / (2*m)) * (theta'*theta);J = ( log( sigmoid(theta'*X') ) * y + log( 1-sigmoid(theta'*X') ) * (1 - y) )/(-m) + (lambda / (2*m)) * ( ( theta( 2:length(theta) ) )' * theta(2:length(theta)) );%grad = ( X' * ( sigmoid(X*theta)-y ) )/m;grad = ( X' * ( sigmoid(X*theta)-y ) )/m + ( lambda / m ) * ( [0; ones( length(theta) - 1 , 1 )].*theta );% =============================================================end

 

调用costFunctionReg.m的代码如下:

%% ============= Part 2: Regularization and Accuracies =============% Optional Exercise:% In this part, you will get to try different values of lambda and % see how regularization affects the decision coundart%% Try the following values of lambda (0, 1, 10, 100).%% How does the decision boundary change when you vary lambda? How does% the training set accuracy vary?%% Initialize fitting parametersinitial_theta = zeros(size(X, 2), 1);% Set regularization parameter lambda to 1 (you should vary this)lambda = 1;% Set Optionsoptions = optimset('GradObj', 'on', 'MaxIter', 400);% Optimize[theta, J, exit_flag] = ...  fminunc(@(t)(costFunctionReg(t, X, y, lambda)), initial_theta, options);% Plot BoundaryplotDecisionBoundary(theta, X, y);hold on;title(sprintf('lambda = %g', lambda))% Labels and Legendxlabel('Microchip Test 1')ylabel('Microchip Test 2')legend('y = 1', 'y = 0', 'Decision boundary')hold off;% Compute accuracy on our training setp = predict(theta, X);fprintf('Train Accuracy: %f\n', mean(double(p == y)) * 100);

 

⑥总结:

本文是对Stanford Machine Learning课程中的logistic regression的总结。结合课后编程习题,对logistic regression 各个知识点和编程作业中的代码、实现原理作了详细的解释。

有兴趣并且有时间学一名新技术是一件幸福的事情。

 

 

原文:http://www.cnblogs.com/hapjin/p/6078530.html




原标题:Stanford coursera Andrew Ng 机器学习课程编程作业(Exercise 2)及总结

关键词:

*特别声明:以上内容来自于网络收集,著作权属原作者所有,如有侵权,请联系我们: admin#shaoqun.com (#换成@)。

我们谈谈2019的YouTube广告营销怎么做?:https://www.ikjzd.com/articles/17721
亚马逊为打击假货出台新项目 能保证实现“零假货”吗?:https://www.ikjzd.com/articles/17722
亚马逊宣布在全球范围内停售Dash购物按钮!:https://www.ikjzd.com/articles/17723
罚哭!这位亚马逊卖家因评论造假惨遭1280万美元罚款!:https://www.ikjzd.com/articles/17724
报税时0申报和不申报的区别和影响!:https://www.ikjzd.com/articles/17725
聊聊东南亚虾皮shopee的选品:https://www.ikjzd.com/articles/17726
深圳西乡三月三北帝庙会的千岁盆菜多少钱:https://www.vstour.cn/a/365180.html
TikTok SEO:TikTok会取代谷歌吗?:https://www.kjdsnews.com/a/1836538.html
相关文章
我的浏览记录
最新相关资讯
海外公司注册 | 跨境电商服务平台 | 深圳旅行社 | 东南亚物流