星空网 > 软件开发 > Java

解决内存溢出问题

默认参数不适合生产环境使用,因此需要修改一些参数

1、修改启动时内存参数、并指定JVM时区 (在windows server 2008 下时间少了8个小时):

 

在Tomcat上运行j2ee项目代码时,经常会出现内存溢出的情况,解决办法是在系统参数中增加系统参数: 

 

window下, 在catalina.bat最前面:
set JAVA_OPTS=-XX:PermSize=64M -XX:MaxPermSize=128m -Xms512m -Xmx1024m;-Duser.timezone=GMT+08;
一定加在catalina.bat最前面。

 

linux下,在catalina.sh最前面增加:

JAVA_OPTS="-XX:PermSize=64M -XX:MaxPermSize=128m -Xms512m -Xmx1024m -Duser.timezone=Asia/Shanghai"

 

注意:前后二者区别,有无set,有无双引号。

 

 

2、线程池配置(Tomcat6下)

使用线程池,用较少的线程处理较多的访问,可以提高tomcat处理请求的能力。使用方式:

首先。打开/conf/server.

<Executor name="tomcatThreadPool" namePrefix="catalina-exec-" 
        maxThreads="500" minSpareThreads="20" maxIdleTime="60000" />

最大线程500(一般服务器足以),最小空闲线程数20,线程最大空闲时间60秒。

然后,修改<Connector ...>节点,增加executor属性,如:

<Connector executor="tomcatThreadPool" 
               port="80"

protocol="HTTP/1.1"

maxThreads="600"

minSpareThreads="100"

maxSpareThreads="300"
               connectionTimeout="60000"
               keepAliveTimeout="15000"
               maxKeepAliveRequests="1"
               redirectPort="443"
               ....../>

maxThreads:Tomcat可创建的最大的线程数,每一个线程处理一个请求;

minSpareThreads:最小备用线程数,tomcat启动时的初始化的线程数;

maxSpareThreads:最大备用线程数,一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程;

acceptCount:指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,就是被排队的请求数,超过这个数的请求将拒绝连接。

connnectionTimeout:网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。 
enableLookups:是否允许DNS查询

 

注意:可以多个connector公用1个线程池。

 

3、调整连接相关Connector的参数:

<Connector executor="tomcatThreadPool"
               port="80" protocol="HTTP/1.1" 
               connectionTimeout="60000"
               keepAliveTimeout="15000"
               maxKeepAliveRequests="1"
               redirectPort="443"
               maxHttpHeaderSize="8192" URIEncoding="UTF-8" enableLookups="false" acceptCount="100" disableUploadTimeout="true"/>

 

参数说明:

  • connectionTimeout - 网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
  • keepAliveTimeout - 长连接最大保持时间(毫秒)。此处为15秒。
  • maxKeepAliveRequests - 最大长连接个数(1表示禁用,-1表示不限制个数,默认100个。一般设置在100~200之间) the maximum number of HTTP requests that can be held in the pipeline until the connection is closed by the server. Setting this attribute to 1 disables HTTP/1.0 keep-alive, as well as HTTP/1.1 keep-alive and pipelining. Setting this to -1 allows an unlimited number of pipelined or keep-alive HTTP requests. If not specified, this attribute is set to 100.
  • maxHttpHeaderSize - http请求头信息的最大程度,超过此长度的部分不予处理。一般8K。
  • URIEncoding - 指定Tomcat容器的URL编码格式。
  • acceptCount - 指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,超过这个数的请求将不予处理,默认为10个。defines the maximum queue length for incoming connection requests when all possible request processing threads are in use. Any requests received when the queue is full are refused. The default value is 10.
  • disableUploadTimeout - 上传时是否使用超时机制
  • enableLookups - 是否反查域名,取值为:true或false。为了提高处理能力,应设置为false
  • bufferSize - defines the size (in bytes) of the buffer to be provided for input streams created by this connector. By default, buffers of 2048 bytes are provided.
  • maxSpareThreads - 做多空闲连接数,一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程 the maximum number of unused request processing threads that are allowed to exist until the thread pool starts stopping the unnecessary threads. The default value is 50.
  • maxThreads - 最多同时处理的连接数,Tomcat使用线程来处理接收的每个请求。这个值表示Tomcat可创建的最大的线程数。。 the maximum number of request processing threads to be created by this Connector, which therefore determines the maximum number of simultaneous requests that can be handled. If not specified, this attribute is set to 200.
  • minSpareThreads - 最小空闲线程数,Tomcat初始化时创建的线程数 the number of request processing threads that are created when this Connector is first started. The connector will also make sure it has the specified number of idle processing threads available. This attribute should be set to a value smaller than that set for maxThreads. The default value is 4.
  • minProcessors - 最小空闲连接线程数,用于提高系统处理性能,默认值为10。(用于Tomcat4中)
  • maxProcessors - 最大连接线程数,即:并发处理的最大请求数,默认值为75。(用于Tomcat4中)

备注:

Tomcat4中可以通过修改minProcessors和maxProcessors的值来控制线程数。

在Tomcat5+主要对以下参数调整
maxThreads
 Tomcat使用线程来处理接收的每个请求。这个值表示Tomcat可创建的最大的线程数。
 acceptCount 
 指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,超过这个数的请求将不予处理。
 connnectionTimeout 
 网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
 minSpareThreads 
 Tomcat初始化时创建的线程数。
 maxSpareThreads 
 一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程。  

 

 

 4、负载均衡、集群的配置

Tomcat6支持分布式部署,可以实现集群功能,提高响应能力。

 

5、

利用JMX监控Tomcat运行情况,需要手工调整启动参数,如下:

打开cataline.bat,增加一行

set JAVA_OPTS=%JAVA_OPTS% -Dcom.sun.management.jmxremote.port=10090 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file="%CATALINA_BASE%\conf\logging.properties"

 

linux下修改cataline.sh:
JAVA_OPTS="-Dcom.sun.management.jmxremote.port=10090 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=%CATALINA_BASE\conf\logging.properties"

注意JDK\jre\lib\management\management.properties文件必须存在。

 

重新启动tomcat节点,然后用jconsole连接(此处端口wei10090)

 

6、Tomcat增加一个应用

在server.

<Context displayName="OA" docBase="/app/web-apps/GACWP" path="" />

path代表上下文名称,空表示是根路径




原标题:解决内存溢出问题

关键词:内存

*特别声明:以上内容来自于网络收集,著作权属原作者所有,如有侵权,请联系我们: admin#shaoqun.com (#换成@)。

怎么用fba发货:https://www.goluckyvip.com/tag/48569.html
饰品行业:https://www.goluckyvip.com/tag/4857.html
深圳义乌:https://www.goluckyvip.com/tag/4858.html
怎么找海外仓:https://www.goluckyvip.com/tag/48586.html
怎么找外贸客户:https://www.goluckyvip.com/tag/48588.html
国外社交媒体:https://www.goluckyvip.com/tag/4859.html
深圳有没有比较好玩的景点 深圳有没有比较好玩的景点推荐一下:https://www.vstour.cn/a/366175.html
长治婚庆女司仪和主持人:https://www.vstour.cn/a/366176.html
相关文章
我的浏览记录
最新相关资讯
海外公司注册 | 跨境电商服务平台 | 深圳旅行社 | 东南亚物流